Die Weld Repair

Micro Welding

General

Steel Weldments

Large Fabrications

Bearing Diameter Weld Repair

GMP Welding & Fabrication, INC. is capable of working with most alloys:

A36
4130 / 4140 

Mold and Tool steels such as:
A-2, D-2, S-7, P-20, etc.

Stainless steels such as:
304, 316, 400 series, 2209, 17-4 ph etc. 

Hastelloy and Inconel alloys such as:
Inco 718, Inco 625 and Inco 617.
Hast C, Hast C276, Hast W, Hast B

Most Aluminum Alloys

This damaged S-7 mold insert was micro welded with under 10 amps to reduce weld distortion. It is ready to be machined back to designed specification and put back into production.

This is an Aluminum Bronze weld overlay of a worn out bearing diameter.

We can weld your worn out punch and die section cutting edges and maintain the designed hardness specifications. These parts were welded and are ready to be machined.

These are fan blade assemblies.

Stainless Steel Vacuum Dryer

GMP Welding supplies vacuum dryer ovens to the food service industry.

This is a bearing diameter and seal diameter weld overlay on a 7" diameter steel mixer blade Shaft.

Both will be remachined to the proper sizes and put back into service.

Before

This 2" diameter arbor was damaged during machining. The material is hardened 8620.

These are limit switch brackets.

Stainless Steel Steps

We supply custom equipment to the Pharmaceutical Industry.

This is a gear assembly.

After

The arbor is welded, matching the hardness of the base material and is ready to be machined back to its original condition.

Large Oil Pump Weldment

The welds on this pump had to pass stringent ultrasonic  inspection.

Gear Weldment Assembly

Gear assembly welded semi-automatic on a rotating positioner.  We have welding positioners up to 25,000 pound capacity.

​​​With three 10 ton cranes and 26 feet under hook, large fabrications are no problem.